Function |
|
|
Videospa |
| |
|
|
|
| |
|
|
|
LCD |
|
|
20.1-inch diagonal TFT Active Matrix |
Resolution |
|
|
460(W) x 305(W) x 60(D) |
Brightness |
|
|
1000 nits |
Aspect Ratio |
|
|
4:3 |
Active Area |
|
|
408 x 306 mm |
Contrast Ratio |
|
|
500:1 |
Display Colors |
|
|
16.7 million |
Input Connectors:
RF
Video
SVGA |
|
|
Antenna/CATV
S-Video and composite video
15 pin D-sub |
Input Power |
|
|
SB-EP20A External Power Pack: 12 V DC, 6.5 A power supply
requires 100 to 240 VAC, 47-63 Hz, 80W |
Audio |
|
|
5 Watt, water-resistant speakers
L/R Audio output connector inside rear cover |
Operating Temp |
|
|
10° to 122° F. (-12o° to 50° C.) |
Non-op. Temp.
(Off-mode with
power applied) |
|
|
-24° to 140° F. (-31° to 60° C.) |
Internal Heater |
|
|
Factory-installed |
Internal IR
Control Window |
|
|
For use with Xantech 282M emitter (not supplied) |
Accessories Included |
|
|
Remote control with batteries |
TV Dimensions |
|
|
19.4 in. W x 17.8 in. H x 4.0 in. D |
SB-EP20A Dimensions |
|
|
13.5 in. L x 5.0 in W x 2.6 in. D |
TV Weight (net) |
|
|
17.0 lbs. |
SB-EP20A Weight |
|
|
2.5 lbs. |
Waranty |
|
|
One-year, in-factory, parts and labor
|
Optional Acessories
|
|
|
|
| |
|
|
|
SB-WM20 |
|
|
Wall mount, articulating, 2.5” to 8.5” D, tilt and swivel |
SB-WM20NA |
|
|
Wall mount, non-articulating, 2.5” D, tilt and swivel |
SB-DP20X |
|
|
Deck/planter pole mount, to be purchased with SB-WM20 wall mount |
SB-DC20 |
|
|
Outdoor TV dust cover |
SB-EPC2 |
|
|
25-foot power cable extension for SB-EP20A External Power Pack |
|
|
|
|
| |
 |
 |
Innovative Watertight Cable Entry System.
Easy-to-use pass-through design allows for use of standard cable sets, while protecting
them from the elements.
Optional Pole Mounting: An aluminum pole mounting kit allows easy installation in any backyard setting. The pole and supporting flange are made from heavy-gauge aluminum and are powder-coated to eliminate any corrosion problems. The pole can be set in concrete, in
a planter or bolted directly to a flat surface such as a patio or a pool deck. Oversized entry and exit holes are pre-drilled in the pole , so wiring is concealed inside the pole. Includes
articulating mount. Dimensions: Pole is 2” W x 2” D x 61” H. Mounting flange is 8” W x 8” D.
|
|
 |
